Molybdenum spraying wire is covered with graphite. After removing the graphite, it has a metallic luster. Thin layers of molybdenum are sprayed thermally on surfaces of mechanically strongly stressed automobile parts, such as piston rings, synchronizer rings, shift elements, to increase their abrasion resistance.
Diameter (mm) | 3.17 | 2.3 |
Tolerance (mm) | +/-0.05 | +/-0.025 |
Tensile strength | >700-900MPa | |
Elongation | >20-5% |
Tailor-made spray wire is also available.
* Used as a thin coating on the surface of vehicle components including piston rings, gearbox synchromesh parts, selector forks, etc. due to its high wear resistance.
* Sprayed onto machine parts such as bearing for repair purposes.
Our moly spraying wire is carefully handled to minimize damage during storage and transportation and to preserve the quality of the product in its original condition.