Alloy 75 (UNS N06075, Nimonic 75) is a 80/20 nickel-chromium alloy with controlled additions of titanium and carbon. Nimonic 75 has good mechanical properties and oxidation resistance at high temperatures.
Alloy 75 (UNS N06075, Nimonic 75) is a 80/20 nickel-chromium alloy with controlled additions of titanium and carbon. Nimonic 75 has good mechanical properties and oxidation resistance at high temperatures. Alloy 75 is most commonly used for sheet metal fabrications which require oxidation and scaling resistance together with medium strength at high operating temperatures.
Alloy 75 (Nimonic 75) is also used in gas turbine engines, for components of industrial furnaces, for heat treating equipment and fixtures, and in nuclear engineering.
Element | Content (%) |
---|---|
Nickel, Ni | Remainder |
Chromium, Cr | 18-21 |
Iron, Fe | 5.00 max |
Silicon, Si | 1.00 max |
Manganese, Mn | 1.00 max |
Titanium, Ti | 0.2-0.6 |
Copper, Cu | 0.5 |
Carbon, C | 0.08-0.15 |
Properties | Metric | Imperial |
---|---|---|
Density | 8.37 gm/cm3 | 0.302 lb/in3 |
Properties | Metric | Imperial |
---|---|---|
Tensile strength(annealed) | 750 MPa | 109 ksi |
Yield strength(annealed) | 275 MPa | 40 ksi |
Elongation at Break | 42% | 42% |
Modulus of Elasticity | 206 GPa | 29878 ksi |
Rod, Bar, Wire, Forging, Plate, Sheet, Strip, Pipe and Tube
Our NIMONIC 75 is carefully handled to minimize damage during storage and transportation and to preserve the quality of the product in its original condition.