The aluminum-magnesium alloy is light in weight, low in density, good in heat dissipation, and strong in pressure resistance, which can fully meet the requirements of 3C products for high integration, lightness, miniaturization, impact resistance, electromagnetic shielding, and heat dissipation.
Catalog No. | AL3442 |
---|---|
Material | Al, Mg |
Thickness | 0.20-300 mm |
Width | 20-2500 mm |
Length | 500-16000 mm |
The aluminum-magnesium alloy is light in weight, low in density, good in heat dissipation, and strong in pressure resistance, which can fully meet the requirements of 3C products for high integration, lightness, miniaturization, impact resistance, electromagnetic shielding, and heat dissipation.
Chemical Composition | |
Elements | Content % |
Al | Bal. |
Si | ≤0.40 |
Cu | ≤0.10 |
Mg | 4.0~4.9 |
Zn | ≤0.25 |
Mn | 0.40~1.0 |
Ti | ≤0.15 |
Cr | 0.05~0.25 |
Fe | 0.000~0.400 |
Tensile strength σb (MPa) | ≥270 |
Conditional yield strength σ0.2 (MPa) | ≥110 |
Elongation δ10 (%) | ≥20 |
Elongation δ5 (%) | ≥12 |
Widely used as marine aluminum plates, rail transit, automobile bottom plates, carriage plates, molds, etc.
Our Aluminum Alloy 5083 Sheet is carefully handled during storage and transportation to preserve the quality of our product in its original condition.